Add or edit an inspection default value policy

1. From the Classic admin menu, select Agency profile > Security policy.

2. Select Inspection default value policy.

   If you know the inspection group you want to work with, enter it in the Inspection group field; otherwise, leave the field blank.

3. Select Submit.

4. Select the link for the inspection group with which you want to work.

   To assign security settings for all inspection groups, select All inspection groups.

5. Select the link for the inspection type you want to work with.

   To assign security settings for the entire inspection group, select All inspection types.

6. Select from the Agency or group name drop-down list the agency or group name whose access level you want to specify.

7. Select the Default status for new inspections assigned to the inspection group and inspection type.

8. Enter the Number of calendar days available to schedule inspections (from 1 to 90) for a public user to schedule an inspection. The default value is 30.

   To enable this feature, you must configure the inspection blockout calendar. For more information, see Calendar scenarios.

9. Select Allow same day inspection scheduling to enable users to schedule inspections on the same day they create the application.

10. Enter the Inspection cutoff time after which users cannot schedule the inspection for the following day.

11. Select Enable from the Status drop-down list if you want to activate this application type security; otherwise, select Disable.

12. If this is a new policy, select Add.

13. Select Save.